Trading with the
Virgin POC
by Michael Jardine
In this article I will discuss three topics: The Price
Histogram study, the Virgin POC option for that study, and a
method for trading with the Virgin POC that I call the
Universal Method. You can see a record of recent trades
here:
http://www.enthios.com/blog.htm
Price Histogram
The Price Histogram is my favorite tool for two reasons:
It is intuitive, and it is extremely effective. There is no
hocus pocus or mathematical wizardry; no need for
exponentials, or smoothing, or weighting. The Price
Histogram simply shows you what you should be able to see
with the naked eye: where the market was most "comfortable"
trading, over any given period. It is also rare among
technical indicators because it is leading, not lagging. It
is a leading indicator because it tells you, quite far in
advance, where the market is likely to turn. Moving
averages and oscillators cannot predict; they can only
suggest, and never in advance, that the market is overbought
or oversold. Lagging indicators are also notoriously bad at
keeping you out of sideways chop.
Traditionally, the Price Histogram study (or others,
sometimes referred to as a Market Profile) has been applied
to a 30-minute chart to provide a histogram of market
activity for one day. Unless I am looking far back in time,
I prefer a 5-minute chart because it is more precise. The
chart below shows a 5-minute Price Histogram study.
The histogram on the left side of the chart is drawn
during the day in five-minute increments. The length of
each horizontal line in the histogram represents the amount
of time that the market spent at that corresponding price.
Thus if the market spends a great amount of time at a
particular price, the histogram line for that price will be
longer. The longest line in the histogram is the one price
where the market spent the most amount of time. It is called
the Point of Control or, alternatively, the Control Point.
Most traders refer to it as the 'POC' for short.
In this chart, you can see that the POC lies at 1183.
The beauty of the Price Histogram is that even if it was not
there, you could probably still look at the chart and guess
that the most amount of time was spent in the region of
1182~1184.
What is significant about the POC? Traders collectively
remember it, consciously or subconsciously. That's all. No
math needed. And the more time that the market trades at a
particular price, the longer - or greater - that memory.
Psychologically, the POC acts as a center of gravity. In
this chart, the POC for October 12, 2005 was 1183. Let's
scroll down and look at what happened on both the day
before, and the day after, October 12.
This next chart shows what happened on the day before,
and after, October 12. It is an excellent, albeit ideal,
illustration of the power of the Price Histogram. Don't
worry. I will also show you what can go wrong.
The POC on 10/11 was 1193. Even without the
histogram and the POC line, you should be able to see that
the market spent most of the day in the 1191~1193 band. At
the end of the day, the market closed almost 5 points below
the POC. Overnight it gapped down slightly but then, for
whatever reason, started to head back up. It is important
to recognize that we cannot predict whether the market will
go up or down. We can only be reasonably sure that as the
market moves closer to a POC line, the gravitational "pull"
of that line increases. What happens when prices hit the
line? The same that happens to any object with weight when
it comes into contact with the source of gravity: it
bounces. If it bounces hard enough - as in a tennis ball
hitting a tennis racket - it will return very quickly from
whence it came. On the morning of October 12 you can see
that the market moved back up to touch the previous day's
POC. Bullish traders tried to push it beyond, but not for
long: that is the strength of the POC. This also
illustrates that the POC is not exact; most people familiar
with price action are aware that when prices reach a turning
point - be it a previous high, low, or congestion range -
that point usually will not act as an exact ceiling or
floor. What happens at that point depends very much upon
the players in the market at that point in time, and that
means that what happens is random. Some traders may try to
move the market higher by buying. If the collective "will"
of the market is in agreement, then the market will move
past the POC. This does not happen often. Because it does
not happen often, astute traders can turn that knowledge
into a profitable trading system. That is exactly what I
have done. What usually happens instead is that the market
may try to move past but then the buyers will dissipate, and
sellers will take over.
Notice in the above chart that the exact same event
occurred on October 13. The market closed below the POC,
then moved back up the following day. When prices hit the
POC, buyers turned to sellers and the market turned back
down.
Point of Control Formation
The histogram tends to form a bell curve, although it is
not always symmetrical. Because it is "turned
sideways", it more closely resembles a pennant. If the
pennant has a sharp "tip" protruding off to the right, that
indicates that prices traded for a long time in a relatively
limited range and so the "gravitational pull" of the
resulting POC will be quite strong. If the pennant has a
blunt tip, then the POC is not well defined and should
be treated accordingly. Sometimes a pennant can have two
tips, one just slightly lesser than the other. In this
case, although the indicator only shows one POC, there are
two POC's. Therefore it is helpful to pay attention to the
actual shape of the histogram and draw your conclusions
accordingly.
In the Properties dialogue box shown below, the default
setting is for a Time based profile. There are options for
Volume-based, and Candle-based. Typically the Time
and Volume based profiles generate POC's that are almost
exactly the same. You can check this by running two
overlapping studies, one for Time and one for Volume. I
usually do not show the histogram on the second study, only
the POC. In those cases where the Volume-based POC is
different from the Time-based POC, I will consider both as
viable.
The Virgin POC
A 'Virgin' POC is one that has not been touched by prices
on subsequent days. It is a term that I came up with but
its significance was first brought to my attention by a
friend, Jim Swartz, who some of you may know as NQoos. The
logic is simple: as described above, a POC acts as a center
of gravity for the market. As prices move towards a POC,
its gravitational pull becomes greater. Two things happen:
the likelihood of prices moving towards that POC increases,
and the likelihood of the market bouncing, or reversing, at
that point increases. But what happens after prices hit the
POC, retrace, then move on through? In that case, the POC
is no longer virgin. Psychologically, the market no longer
sees it as a significant support or resistance pivot.
Traders may still see the prices that originally formed the
POC as a congestion zone, but they will also note that
prices moved through that congestion, and so it has been
'broken.' It is no longer virgin. It is less dependable as
a turning point. Again, there is no hocus pocus to this; it
is just simple common sense.
The 'Virgin POCs' option in the Price Histogram study
draws the POC line to the right until such a time as it is
visited by prices, at which point it is no longer Virgin.
The significance of the Virgin POC (or "VPC", as I
call it) is shown clearly in the 30-minute chart (below)
that shows the Price Histograms for each day over the past
five months.
The black circles show where a VPC clearly and obviously
acted as a price attractor and reversal point. In addition,
many other VPC's on this chart also acted as
support/resistance but you would have to consult the
individual intraday chart to see the price action. In the
next section, we will look at several examples of intraday
action relative to a Virgin POC from a previous day.
The Universal Method
So how can we trade with this knowledge? If prices move
up toward a Virgin POC from below, you could simply short
the VPOC. If prices move down toward a Virgin POC from
above, you could simply buy the POC. I am a bit more
cautious. I look for confirmation from lagging indicators.
In this case, it does not hurt that they are lagging
indicators, because they are used to confirm a leading
indicator. For this I use an oscillator. It really does
not matter which oscillator you use: MACD, CCI, RSI, and
Stochastic will all tell you when the market is overbought
or oversold, or at least when it is beginning to 'turn.'
Of course, they will not tell you with any confidence
whatsoever, whether the market will actually turn. That
confidence comes from the Virgin POC.
I use a stochastic as my oscillator. Rather than using
the cross of the %K through the %D line, instead I look at
the %K lines on two separate stochastic studies: a very slow
one, and a fast one. I use 81 as the moving average for the
slow stochastic, and 9 as the moving average for the fast
stochastic. When the slow stochastic is above the 65 band,
then a cross of the 9 stochastic from above signals a
short. When the slow stochastic is below the 35 band, then
a cross of the 9 stochastic from below signals a long.
This
next chart shows a full oscillation of the slow stochastic,
and the buy and sell signals generated by crossed of the
fast one.
I have created an Alert Study that places an arrow on the
chart and generates a warning sound, whenever the fast
stochastic crosses the slow from below and the slow is below
35, or when the fast stochastic crosses the slow from above
and the slow is above 65.
To understand how I combine the Virgin POC with two
oscillators, let's walk though a trade that occurred
recently, on October 20. As with all of my trades, these
were posted, and time stamped, to my web site as they
occurred.
On October 20, the S&P E-mini opened at 1197.75. The
next chart below shows what I call the "Natural Trading
Range" (NTR): bound by a Virgin POC above, and a
Virgin POC below, the open price. It was posted at the
beginning of the day, as a sort of "road map" for the
trading day. We have no idea whether the market will go up
or down. We only know that as prices approach ONE of the
two Virgin POC's, that VPC will act as a price attractor and
will pull prices towards it. Will prices be pulled all the
way to a VPC? Maybe. Maybe not. We may have to wait two
days. All we know is that if prices touch a VPC, then look
at the lagging stochastic oscillators to confirm trade
entry. Our leading indicator, the Natural Trading Range
created by the Virgin POC's, tells us we will either look
for longs in the 1178 area, or for shorts in the 1211.25
area.
It was not until 3:28 pm that prices finally
hit the VPC below. When prices hit the VPC, I did not go
long. Instead, I checked to see that the slow stochastic
(pink) was below 35. Then I waited for the fast stochastic
to cross up. That was my signal to go long. The dotted
line shows the intended direction of the trade.
I tend to be conservative, so I use various
trade management techniques. One is to observe the Keltner
bands. Keltner Bands are simply a moving average of the
average trading range. They tell you when prices are within
the average range, and when they are outside of it. For me,
it is common sense that when prices move to the other end of
the average trading range, I should take at least half of my
profit there, as shown below. This was a quick trade; six
points in six minutes.
I then look to exit the remaining amount when the slow
stochastic has reached above 65 and the fast stochastic
crosses down, generating a sell signal. Note I only use
this to exit the trade. I would not take a short unless it
was at a VPC.
Trade management is also important. Once I take a profit
on the first half at the Keltner band, I will move my stop
to break-even. The following trade illustrates how the
break-even stop comes in handy:
That is the Universal Method, in a nutshell. Of course,
the astute trader will employ judicious trade management.
It pays to keep a record of all trades, and not just the
trades, but what happens during a trade: the high point and
low point, as well as the time of day, the Keltner band
touches, and anything else that is relevant. With this
information organized in a spreadsheet, you can optimize
both your stops and your targets. You can also determine
which times of day are most effective, and when not to
trade. You can also determine whether certain days of the
week are less effective than others. Knowing where the
optimum stop lies is very important. Here is an example of
the practical application of this knowledge:
Trading Tip:
The Narrow Range Bar
A Study of Market Moods
Ó 2005
al_gorithmThe Markets Live
It is said that markets have personalities. I agree, but
feel it’s more helpful to think of markets having mood
swings. It also helps to view markets as living, breathing
entities with a personality akin to someone with a bipolar
condition. The markets rest and are at peace, then suddenly
erupt and run in one direction until they exhaust
themselves, then rest again. Technically speaking, markets
move from periods of range contraction to range expansion,
and back again.
As The Market Turns
The mind of a trader cycles from the analytical phase,
searching for potential, to the stalking phase, and once a
trade is opened, back to the analytical phase to determine
when the trade should be closed out. Whether scalping
ranges or trend trading, it is important to be able to
identify turns in a market. Measuring the range of
individual bars can help.
The range of a bar is defined as the difference between
the high and the low. A Narrow Range (NR) bar is a price
bar with the smallest range of all the bars in the look back
period. With the correct settings applied to the proper
timeframes, flagging these bars can be very useful for
identifying turning points.
Chasing a market that has already turned and is in the
range expansion phase is difficult and dangerous. It is
certainly less profitable and higher risk than catching a
market right at the turn. But of course, most traders
shudder at the thought of catching market turns or 'picking
tops and bottoms.'
All that is required to catch market turns is keeping in
mind a fundamental concept about price action:
Range Expansion follows Range Contraction. So
with that rule firmly anchored in your mind, you tune the
tools you already know and are comfortable with to the price
action to help identify high probability setups. And
finally, you develop entry techniques and a money management
strategy that minimizes drawdown when external market forces
move the market contrary to the signal given.
This article is about using one tool, the Narrow Range
Bar flag. It can help identify market turns and will
compliment any trend or range trading system.
How To Incorporate NR Bars Into Your Trading
To get used to seeing and identifying NR bars I would
recommend applying the study to your larger timeframe charts
and just observing them for awhile. Continue using what
already works for you and see when the NR bars compliment
the setups you already use. They can be used as a
stand-alone setup, however you should already be competent
at reading price action before you attempt to use them this
way.
Ensign NR7 Properties
The most popular NR Bar setting is 7, followed by 4. My
back study work has confirmed that 7 is the best compromise
between getting a signal too early or late. However, you
really should experiment and determine this for yourself so
you’re comfortable with the setting.
The NR bar flag is an option within the Donchian Channel
study. You will need to apply it to your charts first and
then open the Donchian Channel properties window.
The first property window displayed below shows how to
apply the study as an NR7 paint bar. (This is the preferred
method because your eye needn’t move off the bar under
construction to see what’s happening. The less a trader
needs to focus on and think about during the day, the more
efficient the trader will be.) The bar paints the unique
color selected in the marker color panel, if it’s an NR
bar. Typically, all bars open as NR bars, but as the bar
range expands the bar will change to the normal color. If
you use multiple paint bar studies, make sure the NR bar
study is last in the objects list, otherwise, it will be
overwritten and never paint.
The second properties window shows how to
apply the NR7 bar study as a marker. It may be necessary to
use a marker if you use multiple color bar studies, as some
studies won’t allow a second color bar study to over paint
it.
The Art (or Science!) of Identifying Market Turns Using
NR Bar Studies
If you are familiar with the Candlestick chart analysis,
you will remember the admonition given by Steve Nisson that
not all Candlestick patterns are signals all of the time.
For example: a doji is only important at extremes. In the
middle of a range bound market, doji’s appear frequently and
are typically meaningless. This is true of NR7 bars as well
and is why it is best not to use this study on very small
timeframes. The dilemma of 'knowing' when to
view a Candlestick pattern as meaningful, also presents
itself with flagged NR bars.
So, how does one "know"
when a bar pattern is meaningful or not?
The answer lies in understanding how to use Multiple
Timeframe Analysis (MTFA). Essentially, you look for a
large timeframe setup, then negotiate the entry on a small
timeframe where you will be able to catch the price action
trend reversal easily, which also translates into a safe
entry, even if eventually the market tells you that this
isn’t the turning point. Mastering this, regardless of
one’s system or setups will supercharge your trading. Here
is one example:
NR bars represent a pause in the price action.
Meaningful NR bars occur during retracements and at the end
of range expansion moves.
In the charts above, you’ll see two timeframes. In the
larger 2700T timeframe on the left you’ll see that a
directional move is underway. Note the NR bars at points 1
and 2, flagged by the black dot above the bars. At point 1,
the price action begins a retracement as it approaches a
resistance area (last swing high). The NR bar represents a
pause in the retracement. Just prior to the completion of
that 2700T NR bar dial down to the 900T. The entry is the
break of the first bar in the direction of the trend in the
2700T. More experienced traders can negotiate the trade on
a very small timeframe such as a 50T or smaller.
At point 2 in the 2700T timeframe, we again see a pause
(NR bar) in the move. Just prior to the completion of that
2700T bar dial down to the 900T. A NR bar is just a pause
in the directional move and very frequently precedes a turn
in the market. It is not necessary that a NR bar be the bar
that the market turns on. It can come a few bars before.
It’s just a warning signal to start watching. The entry is
the break of the first 900T bar in the counter trend
direction. Again, more experienced traders can negotiate
the trade on a very small timeframe.
Price action in the upper timeframe must confirm,
ultimately, by making a price action trend reversal before
another period of range expansion can be expected, as seen
in the range-expansion / range-contraction chart at the
beginning of the article. However, it’s usually safe to
enter on a lower timeframe price action trend reversal
because you’ll be positioned early in the move. Remember, a
small hiccup in a larger timeframe can be quite a move in a
lower timeframe. This allows you to get your stops to
breakeven quickly so even if there isn’t a market turn, you
can safely negotiate the entry and in all likelihood get a
nice scalp out of it.
Good luck. If you have any questions feel free to post
them to the emini_traders_anonymous Yahoo group board and
I’ll answer them as time permits.
Trading Tip:
Measuring with Parallel Lines
by: Judy Mackeigan
I want to thank you once again for making things so
"easy" in Ensign Windows. The chart shows my favorite use
of the parallel channel draw tool. In seconds I have all
of the lines including the extensions which makes it easy to
stay focused on the price action. The October upgrade with
the chart specific candlestick settings is a big
improvement. The other changes make Ensign more intuitive
for the new user. Keep up the great work and again thanks
so much for all you do. It is appreciated by many.
|