Projected Fibonacci Targets
by Mohab Nabil

Here is a new technique for determining price targets after a breakout from a previous price swing.  Fibonacci analysis, which is employed by practitioners of various sciences such as astronomy, mathematics, and architecture, also has a role in projecting price targets of financial securities.  After working with Fibonacci ratios for several years, I developed a new technique for determining price targets after a breakout (up or down) from previous price swings, which I call Projected Fibonacci Targets (PFT).

The Basics
Before applying the PFT, it is important to understand that broken support levels often become resistance levels during subsequent rallies, especially if a broken support level coincides with a Fibonacci retracement level.

Figure 1 show a hypothetical example of a price downswing from point A to point B, followed by a consolidation area, and finally a breakdown to point C (a classic example of a downtrend).  The broken support level established during the consolidation now acts as resistance for the subsequent rally.  The resistance at $60 also represents a 50% retracement of the move from A to C ($100 to $20).


Figure 1 - Classic Example of a DownTrend

Figure 2, the chart of Xilinx, Inc, (XLNX), from October 4, 2000, to November 2001 shows a downswing from point A to point B.  The trend halted temporarily and formed a consolidation area with support at around $58.  After breaking below $58, the new downswing reached a low of $35.  Prices then rallied from this low back to $58 -- an important level, because it was the support level of the previous consolidation.  It has now reversed its role and is acting as resistance.  The move from $35 to $58 is approximately a 38.2% retracement of the move from $92 to $35 ($92-$35 = $57 * 0.382 = $21.77 + $35 = $56.77).


Figure 2 - Xilinx, Inc.  (XLNX)

This example reveals that when a resistance level (or a support level) is formed by breaking previous support (or breaking previous resistance), it often coincides with a Fibonacci ratio (of 23.7%, 38.2%, 50%, or 61.8%) of the whole move, resulting in a resistance (or support) level that is not easily breached.

The Technique
The major premise behind the PFT is that market swings in the same direction relate to each other from the point of breakout.  Hence, the move from B to C in Figure 2 relates to the move from A to B by a Fibonacci ratio.  It is important to note the relationship between the two swings originates from the breakout of the support or resistance level, and not from the beginning of the second swing in the same direction.

Based on this principle, we can conclude that breakout points represent important Fibonacci retracement levels for subsequent corrections.  Therefore, price targets can be derived by assuming that a breakout point is one of the Fibonacci retracement levels, and that the trend should continue till it breaks a support/resistance level (established by the Fibonacci retracement levels) and starts a countertrend correction.

By using this technique, you will be able to project future price targets:

Projected Fibonacci Targets use four Fibonacci ratios:  23.7%, 38.2%, 50% and 61.8%.
If prices break out of a horizontal support/resistance level, apply the following formula:

PFT = (Fibonacci ratio * A - B) / (Fibonacci ratio - 1)

where:    
A
is the point where the first price swing started
B is the point where the first price swing ended (horizontal support/resistance)
Fibonacci ratio is one of the following:  23.7%, 38.2%, 50% and 61.8%

You will have to solve for four targets, one for each of the four Fibonacci ratios.  An example of PFT application is displayed in the chart of the Dow Jones Industrial Average (DJIA) in Figure 3.


Figure 3 - Project Fibonacci Targets in an Uptrend.

Note how price levels coincided with the four levels.  An upswing beginning from point A (7400) to point B (8180) was followed by a downside correction.  It is only after prices break out above the resistance that you can apply the PFT.  Then you calculate the four target levels using the PFT formula:

PFT1 = (0.237 * 7400 - 8180) / (0.237 - 1) = 8422

PFT2 = (0.382 * 7400 - 8180) / (0.382 - 1) = 8662  (which halted the advance temporarily)

PFT3 = (0.500 * 7400 - 8180) / (0.500 - 1) = 8960  (which halted the advance temporarily)

PFT4 = (0.618 * 7400 - 8180) / (0.618 - 1) = 9442  (which halted the advance temporarily)

You can apply this technique to a downswing in a similar way.  The weekly chart of the FTSE 100 index in Figure 4 show a downswing starting at point A (6951) and ending at point B(5973), followed by a congestion area that lasted for more than 10 months.  After this consolidation, prices broke out below the support level.

 By applying the PFT formula, you come up with the following price targets:

PFT1 = (0.237 * 6951 - 5973) / (0.237 - 1) = 5669

PFT2 = (0.382 * 6951 - 5973) / (0.382 - 1) = 5368  (which halted the decline temporarily)

PFT3 = (0.500 * 6951 - 5973) / (0.500 - 1) = 4995

PFT4 = (0.618 * 6951 - 5973) / (0.618 - 1) = 4391  (which halted the decline temporarily)

Money Management
The PFT points may also signal trend reversals, making them a handy tool for applying money management strategies.  The chart displayed in Figure 5 illustrates how this can be done.


Figure 5 - PFT as a Money Management Tool

A downswing starts at point A (11750) and ends at point B (9732), followed by an upward reaction, and ultimately a breakdown through support at B.  If you apply the PFT formula, you can calculate the value for the first projected target:

PFT1 = (0.237 * 11750 - 9732) / (0.237 - 1) = 9105

The PFT was reached, as the low for the DJIA was 9107, only two points away from PFT1.  As can be seen in Figure 5, PFT1 marked an important reversal in the weekly trend as the DJIA rallied again, suggesting that you could use it as your exit point.

Conclusion
Like all indicators, the Projected Fibonacci Target (PFT) is not a stand-alone technique, but because of its effectiveness and accuracy in projecting price targets, it should be one of the many tools in a trader's toolbox.  It works because same-direction market swings are often related by Fibonacci ratios from the breakout point of previous support or resistance levels.  These points can be combined with sound money management strategies to minimize risks and maximize profits.

Mohab Nabil, a full member of the Society of Technical Analysts UK, has published numerous articles on technical analysis for both Egyptian and international journals.  He teaches a technical analysis course at Regional Information Technology Institute (RITI) in Cairo, Egypt.  He trades the US equity markets and carries out his own research, with his main focus on pattern recognition and cycle analysis.  He may be reached at mohab12@yahoo.com.  With special thanks to Mr. Norris.


Trading Tip:
Trader Chat Rooms
by Howard Arrington

Ensign Windows has a built-in Chat Room capability where traders meet and exchange insights and help each other.  What makes this chat feature unique is the ease with which traders can share images of the charts they are working with.  The upper portion of the chat room is a fully functional web browser.  The lower portion of the chat room is where messages are exchanged.   Ensign Windows has the ability to upload to any web site chart images by pressing CTRL-J.  The link to these uploads can be automatically posted in the transcript and automatically viewed by the patrons in the chat room.

You do not have to be an Ensign subscriber to use the chat room.  Just download and install the EChat version of Ensign Windows from the Ensign web site at www.ensignsoftware.com/download.htm    Use EChat to be in communication with other traders in one of the chat rooms that are selected by tabs on the bottom of the text input window.  In Ensign Windows, click on the Chat Room button on the main toolbar to open the chat room.  The Chat Room button has a face as the image on the button.

After opening the chat room, click on the SetUp button on the lower right corner of the form.  This gives you an opportunity to enter a nickname you will be known by in the chat room.   The members list can be shown or hidden.  This image shows an example member list.

Double click on a member name to send a private message to the person.  Or, click on the square box by a member name to page the person with both a message and a sound.  This is a great way to let someone know you are trying to reach them and want their attention for a moment in the chat room.  The '64 users' indicates the number of patrons in the chat room.

You are invited to install EChat, and join other traders in the chat room.   Many who have published articles in past issues of the Trading Tips newsletter patronize the B-Line chat room.  Please come join the growing audience of traders who keep in touch with each other in the Ensign chat rooms